How to
How do I connect a filter to the EasyOne Pro/LAB?
To add a filter (2) to the EasyOne Pro, insert the (1) Spirette FA Pro/LAB into the EasyOne Pro handle. Then attach the filter to the Spirette FA Pro/LAB, as shown in the diagram below. If you have questions about how to connect or use ndd filters, please contact ndd customer support in North America at [email protected] and internationally at [email protected].
How do you attach the EasyOne Filter FT?
Leave the wrapper of the ndd FlowTube wrapped around the mouthpiece (see image) to insert the FlowTube into your EasyOne Air. Then, with the wrapper still in place, attach the EasyOne Filter FT to the FlowTube. Ensure that the FlowTube and the EasyOne Filter FTare fully inserted. The EasyOne Filter FT is to be used only with the EasyOne Air. You can watch the instructional video here.
How do you attach the EasyOne Filter SP?
Leave the wrapper of the ndd Spirette wrapped around the mouthpiece (see image) to insert the Spirette into your Easy on-PC. Then, with the wrapper still in place, attach the EasyOne Filter SP to the Spirette. Ensure that the Spirette and the EasyOne Filter SPare fully inserted. The EasyOne Filter SP is to be used only with the Easy on-PC. You can watch the instructional video here.
How do I replace the affected parts on the EasyOne Pro/LAB?
You can find detailed instructions on how to install the annual replacement kit in the EasyOne Pro/LAB manual, chapter 10.2.
How to connect a filter to the EasyOne Pro/LAB
To add a filter (2) to the EasyOne Pro, insert the (1) Spirette FA Pro/LAB into the EasyOne Pro handle. Then attach the filter to the Spirette FA Pro/LAB, as shown in the diagram below. If you have questions about how to connect or use ndd filters, please contact ndd customer support in North America at [email protected] and internationally at [email protected].
How can I perform Phase-III Slope Analysis including Scond and Sacin?
Our research software WBreath can be used to perform a slope analysis. Please click here to get more information on this topic.
How long does it take to test a patient with the EasyOne Pro/LAB?
A PFT session including spirometry and DLCO generally takes less than 20 minutes.